Polymer concrete electrolytic cell for metallurgic industry

The electrolyte seal complies with the sections of norms DIN 18.820-3 and ASTM C582 regarding chemical barriers for FRP tanks.These forms have been validated by more than 40 years of successful industrial experience.This seal typically consists of three layers of fiberglass impregnated with vinyl ester resin (see diagram above).

*The extemal seal is manufatured with same care and quaiy as the elecroyte seal,alhough with only one FRP layer it done not comply with the above standards.
Both seals can be inspected according to norm ASTM D4097 Class IV.As  an option the seals may be pigmented white,gray or other color favorable to refinery operation or purchase preference.

*The Hyperbonded polymer concrete material offers improved mechanical strength and excellent chemical and electric resistance,compared to conventional polymer concrete.It has also been formulated to reduce thermal dilatation that induces high mechanical stress in electro-refining cells.Typical properties as follows.